A bund is designed in such a way that it can contain leaks and spillages from the used, stored or processed liquids background to initiate clean-up operations.
The type of bunding required at a workplace could be determined only by checking the level of risk at the worksite and the type of facility. Some places would be equipped with flammable liquid storage cabinet where you could safely store flammable liquids
A bund would consist of a bund wall or an embankment that surrounds the facility or tanks, an impervious floor within the bunded area, joints in the floor or the wall or between the floors and the wall, associated facilities that are designed to remove liquids away from the bunded area without polluting the nature. Other than preventing pollution of the receiving environment, they can also be used to protect from fire.
All businesses that handle hazardous chemicals are legally obligated to have a spill containment system in place. A failure to have it might end up attracting the attention of authorities and in taking action. If you look up online, you can find a wide range of drum bands, spill pallets and drum management centres that can keep the workplace as well as the employees safe.
Workplaces generally should be prepared for spill containment in cases of an accidental leak or spill. However, it should not be limited to automotive and workshops, shipping and transport, gas, oil and mining, defence and hospitals as well as utilities and councils. The rule of thumb, in the end, should be that dangerous liquids should be stored above the ground where bunding and spill containment is necessary. . In such cases, keeping a stock of Collapsible Bund handy would be helpful so that you can just grab and use it in case an accidental spill or leak takes place.
Flammable and Combustible Liquids
Speaking of flammable liquids, having proper containment systems and bunding would help in preventing explosions, fires, chemical exposure, injuries and catastrophic damage to the environment. Make sure that the handling areas and chemical storage follows all regulations as per the state laws regarding handling chemicals and containing spills without harm or injury to any personnel. The spill bunding should be chemically resistant, impervious, and fire-resistant and should be capable of recovering chemicals. For most workplaces, a requirement for a mix of permanent and temporary spill containment systems that are safe, portable and convenient is necessary. The indoor and outdoor chemical stations should allow in safe delivery intake, transferring, decanting, manufacturing and storage of flammable and combustible liquids.
Level of risk
The level of sophistication the bunds would need would depend on the level of risk posed to the environment from each facility. This would be based on various site-specific factors including:
- Type of liquid that is used or stored and the impacts it could make on the environment
- Amount of liquid that is stored or used
- The ability of the storage system or facility to prevent leaks and spillages
- Duration of temporary storage
- Sensitivity of the environment
Type of Facility
Facilities that should comply with bunding requirements would include but should not be limited to petroleum storage facilities, pesticide storage facilities, facilities that transfer stores
liquids, electrical transformers containing oil or PCBs, processing areas and drum storage areas.
The bund and spill containment products are designed for temporary and secondary storage while improving workplace safety, protection of the environment and housekeeping. Bunded floor systems could be created by joining the low profile drum bunds as it is ideal for areas like decanting stations, inside sea containers or below racking where spills are most likely to occur.